Solar inverter installation is the process of fitting, wiring and configuring the unit that converts the DC electricity your solar panels produce into the AC power your home actually runs on. Clean Earth Solar has carried out solar inverter installations across Hawkesbury and greater Sydney since 2018, with a fully in-house, SAA-accredited team handling everything from sizing through to final commissioning.
We install and configure inverters from Sungrow, Enphase, SigEnergy and Tesla, matched to your panel array, roof layout and whether you are running solar only, adding a battery or setting up a full hybrid solar system. Every solar inverter setup we complete is backed by a lifetime workmanship warranty.
A professional inverter installation covers sizing, mounting, grid connection, configuration, testing and handover so the system is ready to operate safely from day one.
Size the inverter to suit your solar panel array and household energy needs.
Mount the inverter in a compliant, well-ventilated location and connect the DC and AC isolators to the switchboard.
Connect the inverter to the grid and metering, configure it to meet AS/NZS 4777.2 requirements and set up the monitoring app.
Test the system and complete inverter commissioning before handover, so everything is ready to operate and monitor from day one.
Confirm monitoring access, provide compliance documentation and show you how to check system performance.
The inverter needs to be the right size for your solar panels. A 6.6kW panel system with a 5kW inverter is a common setup because panels rarely produce their full rated output all day. This gives you good performance without paying for an inverter that is larger than you need.
We look at your panel size, roof layout and household energy use before recommending an inverter, so the system is sized for your home rather than using the same setup for every property.
Different inverter types suit different roofs, panel layouts and plans for battery storage.
We match the inverter type to your roof, panel array and plans for battery storage rather than using the same setup for every property.
Once the physical installation is complete, solar inverter configuration determines how the unit performs on your network. This covers grid-protection settings, export limits set by your local network provider, firmware updates and pairing the unit with its monitoring app.
Configure protection settings so the inverter operates within the requirements for your local electricity network.
Set any export limits required by your network provider so the system remains compliant when feeding power back to the grid.
Update inverter firmware where required and pair the system with its monitoring app for live performance data.
Confirm the inverter detects grid voltage and frequency correctly and disconnects safely during a blackout unless backup is configured.
We only install and configure inverters listed on the Clean Energy Council approved products register, supporting grid connection and STC eligibility.
Inverter commissioning finishes with a live test. We confirm the inverter reports accurately through your monitoring app before handover. We only install and configure inverters listed on the Clean Energy Council approved products register, which is required for grid connection under AS/NZS 4777.2 and for STC eligibility.
You may need a solar inverter replacement if your inverter has recurring faults, stops responding, produces unusual noise or heat, or your solar system suddenly generates less power than usual. Other signs include a red fault light, recurring error codes or a blank display.
Most solar inverters last around 10 to 15 years compared with the 25 to 30-year lifespan of many solar panels. If your system shows signs of fault, our team can assess it during a solar panel maintenance and repairs visit and advise whether a repair or replacement makes more sense.
Yes. In Australia, solar inverter installation has to be carried out by an installer holding an unrestricted electrical licence and current Solar Accreditation Australia (SAA) accreditation for the system to be safe, legal and eligible for STCs.
An unlicensed or DIY inverter installation can void the manufacturer’s warranty, is very likely to fail a Clean Energy Regulator inspection, and can expose a household to electrical and fire risk given the DC voltages involved. It also disqualifies the system from claiming STCs under the Small-scale Renewable Energy Scheme, since accredited design and installation is a condition of the rebate.
Our electricians hold current SAA accreditation and unrestricted electrical licences, and we provide full compliance documentation, including your electrical safety certificate, on the day of installation.
Pricing depends on inverter type, capacity and whether the job is a new installation or a standalone replacement.
We offer $0 upfront finance options and provide a fixed, written quote before any work begins. Eligible equipment may qualify for STCs under the Small-scale Renewable Energy Scheme.
Your inverter is central to the performance and safety of the solar system. We keep installation, configuration and aftersales support with one in-house team.
SAA-accredited, fully licensed electricians handle every job.
A genuine in-house team, with no subcontracting.
Sungrow Elite Installer and AIKO Excellence Partner status.
Lifetime workmanship warranty on every installation.
Ongoing aftersales support through our customer WhatsApp group.
Over 1,000 systems installed, totalling more than 6.5 megawatts of solar capacity across Hawkesbury and greater Sydney.
From inverter installation and setup through to commissioning and support, the same team remains responsible for the system.
Clean Earth Solar helps homeowners get their solar system working properly again when an inverter becomes unreliable, outdated or beyond economical repair. We can also plan a new inverter installation around a solar battery installation or future hybrid setup.
Most residential inverter installations are completed in a single day, including mounting, wiring and commissioning. Replacing an existing inverter on a system that is already wired usually takes a few hours.
In many cases, yes. If your panels and existing wiring are compatible, we can install a hybrid inverter to add battery capability without replacing your panels. A site assessment confirms compatibility first.
It depends on your current setup. Some string inverters can pair with an AC-coupled battery, while others need a hybrid inverter for DC coupling. We assess your existing system before recommending an option.
We inspect the unit, confirm the fault and provide a fixed quote for solar inverter replacement. Depending on the age and condition of the unit, upgrading to a more efficient model is sometimes the better long-term option.
Yes. Under the Small-scale Renewable Energy Scheme, your inverter must be listed on the Clean Energy Council's approved products register to qualify for STCs.
